|
| National Solbot Electronics Industrial Co., Ltd. |
No. 66, Alley 6, Lane 315, Chung Cheng N. Rd.,
San-Chung Area,
New Taipei City, Taiwan
Tel: 886-2-29894951
Fax: 886-2-29853119
E-mail: solbot@solbotwave.com |
|
|
 |
|
 |
|
 |
|
High Temperature Cast - Iron Tank Lead Free - against corrosion |
| Features : Soldering pot and control box are designed separately |
|
Model |
Tank Spec. |
Power |
Heater |
Solder |
Max. temp. |
N.W. |
1020 |
(L)100x(W)200x(H)50 mm |
220 V |
1.0 kw |
6.5 kg |
350°C |
22 kg |
1020H |
(L)100x(W)200x(H)50 mm |
220V |
1.4kw |
6.5 kg |
500°C |
22 kg |
1035H |
(L)100x(W)350x(H)50 mm |
220V |
3.2kw |
11 kg |
500°C |
24 kg |
1520 |
(L)150x(W)200x(H)60 mm |
220 V |
1.4 kw |
12 kg |
350°C |
24 kg |
1520H |
(L)150x(W)200x(H)60 mm |
220 V |
2.2 kw |
12 kg |
450°C |
24 kg |
2525 |
(L)250x(W)250x(H)150mm |
220 V |
6.6 kw |
66 kg |
300°C |
70 kg |
3045 |
(L)300x(W)450x(H)50 mm |
220 V |
4.6 kw |
45 kg |
300°C |
63 kg |
4050 |
(L)400x(W)500x(H)50 mm |
220 V |
5.6 kw |
65 kg |
300°C |
76 kg |
|
- Solder pot material is made of special casting iron.
- Indirect heating
- LED digital display temperature controller
- Overheat auto-off
- Solid state relay control
- Amp meter
- Cooling fan
|
|
| Main
construction: lnlet Belt Conveyor, Foaming Fluxer, Pre-heater, Single Wave(C250-SW) or Daul
Wave Soldering(C250-DW) Bath, Finger Chain Conveyor, Control
System |
|
| 1. |
Adjust Handle of Finger width (pcb width) |
| 2. |
Spray Volume
Controller |
| 3. |
Emergency
Switch |
| 4. |
Weekly
Timer |
| 5. |
Handle of Solder Pot Roll
IN/Out |
| 6. |
Adjust Handle of Rail Angle |
| 7. |
Touch Pannel
Controller |
| 8. |
Soder Pot Wave
Controller |
| 9. |
Conveyor Speed
Controller |
| 10. |
Exhaust Pipe for Spray
Fluxer |
| 11. |
Exhaust Connector for Spray
Fluxer |
| 12. |
Exhaust Connector for Solder
Pot |
|
|
C250 Series wave solder machine is available with dual waves for mixed technology
(through-hole + SMT) processing or with a single wave for through-hole only.
Stand is included. It has everything you need to get started with lead-free
solders: high-temp finger conveyor, foam fluxer, 16.5" of preheating power,
high-temp solder pot, built-in controls, and stand.
An
upgrade to spray fluxer and touch-screen computer control is also available.
|
Finger conveyor eliminates the expense and time cost of using
pallets and will not wear out from the high temperatures required for lead-free
solders. Heating coils and cast, high-temperature solder pot also visible.
|
|
A rear panel drops open, allowing the supporting legs, shown
folded for storage (L), to deploy, allowing the panel to open for convenient and
easy access to the high-temperature cast solder pot.
|
|
The upgraded model of the 250C includes a spray flux unit (shown
here with its vent) in addition to the foam fluxer, and a PC with touch-screen
controls.
|
|
The upgraded 250C, with door open, showing the optional
touch-screen computer controller (right). Below the touch-screen are the
conveyor speed adjuster and the solder pot wave
adjuster.
|
|
Turning the removable handle (L) manually controls the position
of the solder pot once the rear door is opened, allowing easy access for
cleaning and maintenance.
|
|
The finger conveyor (R, inlet with the adjust handle below),
accepts differing board widths. It can be easily raised or lowered by means of
the manual wheel under the rail (L) at the other
end.
|
|
| Spec. |
Model: 1400DF |
| Power Requirement |
3Ø 220V / 380V / 415V, 50/60Hz |
| Power Consumption |
25.6KW |
| Air requirement |
5kg/cm2 |
| Conveyor angle |
2~6° |
| PC board size |
35~330 mm |
| Fluxing coating method |
drum spray |
| Pre-heater length/zone |
1.4M / 2 zone |
| No.1 Pre-heater consumption (near soldering pot) |
6.6KW |
| No.2 Pre-heater consumption (near fluxer) |
6.6KW |
| Solder pot max. work temp. |
300°C |
| Solder capacity |
300 kg |
| Solder pot consumption |
13.5 KW |
| Conveyor pot motor |
90W x 2 |
| Solder wave height |
max. 10mm |
| Conveyor motor |
60 W |
| Finger cleaner motor |
35 W |
| Outline dimension (L x W x H) |
3650 x 1200 x 1450 mm |
| Net Weight |
820 Kg |
|
Approval by ASAHI, a famous Japanese Brand & Japan Market.
As one of partner of ASAHI, we deliver a high quality wave soldering machine to Japan Market.
Designed to meet Lead-Free solder standards, the double wave soldering module consists of a seamless, acid-proof, stainless steel pot, equipped with internal elements, pump housing and highly stable motor. Closed loop P.I.D. controls keep a precise solder temperature. Gears and wheels built onto the solder pot make it easy to slide in and out for maintenance.
Lead-free soldering does have one glaring disadvantage. The extremely high processing temperatures can wreak havoc on wave solder equipment. The possibility of corrosion or rusting of vital parts can cause unforeseen production downtime while users await expensive replacements. What's worse,
overheating can force the premature retirement of wave solder machines long before their normal life expectancy. SOLBOT Lead free soldering machine is among the first dual wave solder machines designed from a clean sheet of paper specifically for the lead-free age. No other system offers its built-in armor against high heat. For example, the solder pots in most machines are made of titanium, an expensive metal that's highly susceptible to corrosion once heat seeps into seams. This is why ASAHI, Japan's equivalent of Underwriters Laboratories, will not recognize titanium in lead-free soldering environments.
The SOLBOT Lead Free Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System| Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System| Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System| Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System| Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor Systemone-piece no seam pots employ special corrosion-inhibiting stainless steel that can't be hurt by heat. Fingers that grip circuit boards are another heat sensitive area on wave solder machines. Temperatures of 320° and up easily oxidize these parts on most machines. SOLBOT Lead Free Soldering machine grips are made of an extremely heat resistant material which can withstand this kind of heat.
|
 |
|
1400DF Lead Free Soldering Machine. |
C250 Compact Design Lead free wave soldering machine |
|
|
|
| |
 |
???????????,???????????????,??????????,??????????,?????????
|
|
|
| Main
construction: lnlet Belt Conveyor, Foaming Fluxer, Pre-heater, Single Wave(C250-SW) or Daul
Wave Soldering(C250-DW) Bath, Finger Chain Conveyor, Control
System |
|
| 1. |
Adjust Handle of Finger width (pcb width) |
| 2. |
Spray Volume
Controller |
| 3. |
Emergency
Switch |
| 4. |
Weekly
Timer |
| 5. |
Handle of Solder Pot Roll
IN/Out |
| 6. |
Adjust Handle of Rail Angle |
| 7. |
Touch Pannel
Controller |
| 8. |
Soder Pot Wave
Controller |
| 9. |
Conveyor Speed
Controller |
| 10. |
Exhaust Pipe for Spray
Fluxer |
| 11. |
Exhaust Connector for Spray
Fluxer |
| 12. |
Exhaust Connector for Solder
Pot |
|
|
|
SP Series Lead Free Automatic Temperature ControlSolbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System|Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System|Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System|Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System|Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System |
|
．RoundSolbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System|Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System|Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System|Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System|Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor SystemFeatures |
The pot is designed for easy movement and installment. The automatic temp. control ensures great safety. besides, special designs for clearing away oxides are attached.
Application: Melting wax, welding electronic parts and wires and DE soldering for through hole components, connector etc. |
|
Model |
Spec. |
Power |
Heater |
Solder |
temp. |
N.W. |
R-64 |
60X40 mm |
110/220 V |
350 w |
1.5 kg |
400°C |
2.5 kg |
R-84 |
80X40 mm |
110/220 V |
450 w |
2.0 kg |
400°C |
2.8 kg |
R-104 |
100X40 mm |
110/220 V |
550 w |
2.5 kg |
400°C |
3.3 kg |
|
|
SP Series Lead Free Automatic Temperature ControlSolbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System|Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System|Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System|Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System|Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System |
|
This Point-Soldering Machine, made of thick cast iron, is designed especially for high temp. soldering up to 300oC.
It is suitable for soldering transformers, DE soldering for through hole components, connector etc.
The flow nozzle can be changed when a partial soldering or removing. There is no need to clean away the dioxides during operation. Special flow nozzles can be made required. |
|
．Point Soldering Machine Features |
|
- Solder pot material is made of special casting iron.
- Duct and nozzle is made of SUS 316L
- Nozzle can be customized.
- Solder wave height can be adjusted.
- Time of flow wave can be set.
- Temperature is controlled by PID and SSR.
- Two methods of flow waves: continuous and time-controlled. ˇ
- Work bench is anti static electricity
|
|
Spec. |
Model: 120 F |
Power Req. |
AC 220V 1phase |
Consumption |
3 kw |
Solder Capacity |
16 kg |
Flow Wave Motor |
25 W |
Operating Temp. |
300°C |
Warm-up Time |
Approx 30 min (250°C) |
Volume |
615x260x300 mm |
Net Weight |
30 kg |
|
|
|
SP Series Lead Free Automatic Temperature ControlSolbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System|Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System|Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System|Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System|Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System |
|
.SP SeriesSolbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System|Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System|Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System|Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor System|Solbot Electronics | lead free wave soldering machine | Soldering Pot | Fluxer Controller | Conveyor SystemFeatures |
- This is the simplest and easiest PCB soldering device.
- The inner tank and heating tubes are made of stainless steel. On the controlling box, there are temperature and ampere meters, which is helpful to a safe and convenient operation.
- The 24-h timer is optional.
|
Model No. |
Consumption (kW) |
Pot Size (mm) |
Weight of meld tin (Kgs) |
SP1015S1 |
0.6 x 1 |
100 x 150 x 70 |
6.6 |
SP1318S1 |
0.8 x 1 |
130 x 180 x 70 |
10.3 |
SP1520S1 |
0.9 x 1 |
150 x 200 x 70 |
13.2 |
SP1825S1 |
0.9 x 2 |
180 x 250 x 70 |
19.8 |
SP2030S1 |
1 x 2 |
200 x 300 x 70 |
26.4 |
SP3040S1 |
1.3 x 3 |
300 x 400 x 70 |
52.8 |
SP3045S1 |
1.5 x 3 |
300 x 450 x 70 |
56.4 |
SP3047S1 |
1.5 x 1 |
300 x 470 x 70 |
62 |
SP3050S1 |
1.5 x 3 |
300 x 500 x 70 |
66 |
SP35S6S1 |
1.6 x 3 |
350 x 550 x 70 |
84.7 |
SP4050S1 |
1.6 x 4 |
400 x 500 x 70 |
66 |
SP4060S1 |
1.6 x 4 |
400 x 600 x 70 |
105.6 |
SP4070S1 |
1.6 x 4 |
400 x 700 x 70 |
123.2 |
|
| |
|
???????????,???????????????,??????????,??????????,?????????
|
|
| |
| |
 |
|
 |
|
Pre-heater ON/OFF
Switch
